Seminar Details

Fast Track for Deploying HPE FlexFabric Comware Technologies (H8D09S)

ETC
H8D09S
Hersteller-ID: H8D09S
Prüfungs ID:
Dauer: 5 Tage
Preis: € 3.360.- exkl.MwST
Wissensgarantie: hier nicht automatisch anwendbar – bitte kontaktieren Sie Ihren Betreuer für Details
This course gives network engineers an opportunity to plan for and implement networks utilizing HPE Comware devices. Participants will work HPE IRF, IMC, ACLs, QoS, OSPF, BGP, and Multicast technologies. This course covers basic and advanced topics; learner will experience both theory and hands on real hardware through lab exercises over five days. 

The learner will configure and monitor Comware devices using open standard technologies. You will work with Layer 2 technologies, such as Multiple Instance Spanning Tree (MSTP) and Link Aggregation (Trunks). You will also learn about Layer 3 technologies, such as static routes, Open Shortest Path First (OSPF) with Multi-Area implementations, and Border Gateway Protocol (BGP), along with Multicast solutions leveraging Protocol independent Multicast (PIM) both dense and spare modes. 
Alle Details einblenden

Zielgruppe

Dieses Seminar richtet sich an:
This course is intended for network or systems administrators, network engineers, and consultants who plan to deploy HPE Comware 7 switches into a new or existing network.

Vorkenntnisse

Für dieses Seminar werden folgende Vorkenntnisse empfohlen:
  • This course is recommended for students who need to deploy HPE FlexFabric technologies based on Comware. It does not require completion of any previous HPE networking courses
  • Network experience is required

Schwerpunkte

Introduction-SME
  • Welcome to Fast Track for Deploying HPE FlexNetwork Comware Technologies
  • Course schedule
  • Introductions

Basic Setup-SME
  • Accessing the console of an HPE Comware switch
  • Levels of access and privilege levels
  • CLI introduction and navigation 
  • Basic configuration
  • Interface configuration
  • Troubleshooting

Protecting Management Access
  • Applying password protection to local and remote authentication
  • Associating user roles with password and scheme authentication
  • Implementing remote management with telnet, SSH, web, and SNMP access

Management of Software and Configuration Files
  • Understanding the boot up process of the HPE switches
  • Understanding how to use the flash file system on the HPE switches 
  • Upgrading the operating systems on the HPE switches
  • Managing configuration files on the HPE switches

VLANs
  • Reviewing VLANs and the various types of VLAN
  • Understanding when to use each of the three VLAN port types
  • Configure VLANs and assign IP addresses to VLAN interfaces 
  • Implementing basic routing on directly connected VLANs
  • Verify connectivity within and between VLANs

IP Services
  • Implementing DHCP server and DHCP relay on Comware switches
  • Implementing secure NTP on Comware switches
  • Understanding and configuring basic logging options
  • Implementing DNS to resolve names to addresses

Spanning Tree Protocol
  • Overview of pre-2004 IEEE 802.1D standard
  • Overview of RSTP
  • Overview of PVST+
  • Overview and configuration of MSTP on Comware switches
  • Configuration of STP security features on Comware switches

Link Aggregation
  • Reviewing problems with STP and load sharing with STP
  • Introducing link aggregation
  • Comparing and contrasting the different link aggregation types
  • Configuring and verifying link aggregation on Comware switches

IP Routing
  • VLANs and routing
  • Static routing
  • Dynamic routing with RIP
  • Dynamic routing with OSPF
  • Single area OSPF configuration

Intelligent Resilient Framework (IRF)
  • Understanding the technologies and concepts involving IRF
  • Understanding the advantages that IRF provides
  • Describing a split stack and how the Multi-Active Detection (MAD) protocol deals with this problem
  • Configuring a simple IRF topology
  • Verifying and troubleshooting an IRF topology

Introduction to Intelligent Management Center (IMC)
  • Understand the components of IMC
  • Understand how to install IMC
  • Understand how to access IMC
  • Implement a basic configuration using IMC

Access Control Lists (ACLs)
  • Define ACL and identify the criteria by which ACLs select traffic
  • Configure ACLs on HPE Comware based switches to select given traffic 
  • Apply static ACLs to interfaces to meet the needs of a particular scenario
  • Examine an ACL configuration and determine the action taken on specific packets

Quality of Service
  • Configure HPE switches to honor the appropriate QoS marks applied by other devices
  • Create a QoS policy that assigns a specified class of traffic to a priority queue
  • Select and implement an appropriate strategy for queue scheduling
  • Implement traffic policing policies that enforce the negotiated committed information rate (CIR),committed burst size (CBS), peak information rate (PIR), and excessive burst size (EBS) for a specified class of traffic 
  • Respond to congestion in advance by applying the appropriate traffic shaping and Weighted Random Early Detection (WRED) policies
  • Determine the QoS mark that an HPE switch will assign to specific outbound traffic and, if necessary, adjust the mark

Advanced Open Shortest Path First
  • Deploy HPE products in single-area and multiple-area OSPF systems
  • Use area definitions and summaries to create efficient and scalable, multiple-area designs
  • Advertise routes to external networks in a variety of OSPF environments 
  • Promote fast, effective convergence during a variety of failover situations
  • Use virtual links as required to establish nondirect connections to the backbone
  • Implement OSFP authentication

Exterior Border Gateway Protocol
  • Establish and monitor eBGP sessions between your routers and Internet Service Provider (ISP) routers
  • Advertise an IP block to multiple ISP routers 
  • Filter BGP routes as required for a dual-homed ISP connection
  • Configure a BGP router to advertise a default route in OSPF or to redistribute and aggregate BGP routes, as appropriate 

IP Multicast
  • Route multicast traffic using Protocol Independent Multicast-Dense Mode (PIM-DM) or Protocol Independent Multicast-Sparse Mode (PIM-SM)
  • Select and configure rendezvous points (RPs) based on particular environmental needs such as redundancy and efficient operation 
  • Minimize unnecessary multicast flooding
  • Apply advanced controls such as source-specific multicasting (SSM) and administrative scopes to a PIM-SM deployment
Alle Details ausblenden

1 Termin wählen

Was ist:
ILT

Ihr Klassenraumtraining - mehr Infos zu Instructor Led Trainings bei ETC erhalten Sie HIER

vILT

Mehr Infos zu vILT erhalten Sie hier

Live

Ihr virtuelles Training - mehr Infos zu ETC>Live erhalten Sie HIER

Hybrid VBT

Mehr Infos zu VBTs erhalten Sie HIER

Hybrid MOOC

Mehr Infos zu MOOCs erhalten Sie HIER

Coached Learning

Mehr Infos zu Coached Learning erhalten Sie HIER

Hotseat

Mehr Infos zum ETC Hotseat erhalten Sie HIER

Info

zusätzliche Infos zum Seminartermin

Alle Preise exkl. Mwst.

2 Paket wählen

Fast Track for Deploying HPE FlexFabric Comware Technologies

ETC Live

  • Virtual Training – aber live im Seminar
  • Keine Anfahrt ins Seminarzentrum notwendig
  • Seminarunterlagen, Teamwork, Labs 24/7
  • ETC>Live Support und Hotline
  • ETC-Services

 

€ 3.360.-
(€ 3.360.- p.P.)

Preis

  • Ihr ILT Seminar (Instructor Led Training)
  • Seminarunterlagen, Teamwork, Labs
  • Verpflegung vorort in einem der ETC Seminarzentren
  • Seminar-Services
€ 3.360.-
(€ 3.360.- p.P.)

Könnte sie auch interessieren

Ihre Fragen zum Seminar

CHAT mit Experten ODER Rückruf anfordern

Kein passender Termin dabei? Mehr als 5 Personen? Firmentermin gewünscht?

Rufen sie uns an +43/1/533 17 77 - 99

Bewertungen

Bisher keine Bewertungen